08X18H10T — stainless Steel: Composition, Properties & Applications
Also known as: 08X18H10T
Ti-stabilized 304, intergranular corrosion resistant. (GOST 5632; equiv ASTM 321 / EN 1.4541 / JIS SUS321 / GB 06Cr18Ni11Ti). Nominal values—confirm mill certificate.
CHEMICAL COMPOSITION
C:≤0.08;Cr:17.0-19.0;Ni:9.0-12.0;Ti:≥5×C
MECHANICAL PROPERTIES
Tensile:≥515 MPa;Yield:≥205 MPa;Elong:≥40%
TYPICAL APPLICATIONS
钛稳定304，抗晶间腐蚀。,"Plate
AVAILABLE FORMS
Sheet
STANDARDS & EQUIVALENT GRADES
GOST 5632 08X18H10T; ASTM 321; Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
HEAT TREATMENT
Tube"
PROCESSING PRECAUTIONS
Austenitic stainless steel with excellent corrosion resistance, formability and weldability; non-magnetic in annealed condition. High nickel (≈10.5%) stabilises the austenite and improves toughness and pitting resistance. Used in food processing, chemical plant, architecture, heat exchangers, kitchenware and medical devices.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 08X18H10T in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
Ti-stabilized 304, intergranular corrosion resistant. (GOST 5632; equiv ASTM 321 / EN 1.4541 / JIS SUS321 / GB 06Cr18Ni11Ti). Nominal values—confirm mill certificate.
CHEMICAL COMPOSITION
C:≤0.08;Cr:17.0-19.0;Ni:9.0-12.0;Ti:≥5×C
MECHANICAL PROPERTIES
Tensile:≥515 MPa;Yield:≥205 MPa;Elong:≥40%
TYPICAL APPLICATIONS
钛稳定304，抗晶间腐蚀。,"Plate
AVAILABLE FORMS
Sheet
STANDARDS & EQUIVALENT GRADES
GOST 5632 08X18H10T; ASTM 321; Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
HEAT TREATMENT
Tube"
PROCESSING PRECAUTIONS
Austenitic stainless steel with excellent corrosion resistance, formability and weldability; non-magnetic in annealed condition. High nickel (≈10.5%) stabilises the austenite and improves toughness and pitting resistance. Used in food processing, chemical plant, architecture, heat exchangers, kitchenware and medical devices.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 08X18H10T in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
0 Comments
No comments yet. Be the first to share your thoughts!
Leave a Comment