08Х15Н24В4ТР — stainless Steel: Composition, Properties & Applications
Also known as: 08Х15Н24В4ТР
Russian GOST heat-resistant stainless.
CHEMICAL COMPOSITION
C:≤0.08;Si:≤0.80;Mn:≤2.00;Cr:14.00-16.00;Ni:22.00-25.00;W:3.50-4.50;Ti:0.40-0.80;P:≤0.035;S:≤0.020
TYPICAL APPLICATIONS
International high-end steel for aerospace, oil & gas, defense or engineering.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire, powder
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 08Х15Н24В4ТР in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
Russian GOST heat-resistant stainless.
CHEMICAL COMPOSITION
C:≤0.08;Si:≤0.80;Mn:≤2.00;Cr:14.00-16.00;Ni:22.00-25.00;W:3.50-4.50;Ti:0.40-0.80;P:≤0.035;S:≤0.020
TYPICAL APPLICATIONS
International high-end steel for aerospace, oil & gas, defense or engineering.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire, powder
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 08Х15Н24В4ТР in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
0 Comments
No comments yet. Be the first to share your thoughts!
Leave a Comment