0Cr13Ni5Mo — stainless Steel: Composition, Properties & Applications
Also known as: 0Cr13Ni5Mo
Chinese GB steel grade 0Cr13Ni5Mo
CHEMICAL COMPOSITION
C:≤0.30;Si:≤1.00;Mn:≤1.00;Cr:11.00-20.00;Ni:0.00-14.00;P:≤0.035;S:≤0.030
TYPICAL APPLICATIONS
Chinese national standard (GB) steel grade per GB/T specification.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 0Cr13Ni5Mo in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
Chinese GB steel grade 0Cr13Ni5Mo
CHEMICAL COMPOSITION
C:≤0.30;Si:≤1.00;Mn:≤1.00;Cr:11.00-20.00;Ni:0.00-14.00;P:≤0.035;S:≤0.030
TYPICAL APPLICATIONS
Chinese national standard (GB) steel grade per GB/T specification.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 0Cr13Ni5Mo in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
0 Comments
No comments yet. Be the first to share your thoughts!
Leave a Comment