00Cr25Ni22Mo2N — stainless Steel: Composition, Properties & Applications
Also known as: 00Cr25Ni22Mo2N / 奥,
00Cr25Ni22Mo2N is a stainless steel grade from Shanxi Youte Steel, engineered for demanding industrial service where consistent chemistry and reliable mechanical performance are critical.
TYPICAL APPLICATIONS
Sheet, Plate, Bar, Tube, Pipe
AVAILABLE FORMS
Austenitic stainless steel with excellent corrosion resistance, formability and weldability; non-magnetic in annealed condition. High nickel (≈23%) stabilises the austenite and improves toughness and pitting resistance. Molybdenum (≈2.1%) enhances resistance to chloride pitting and crevice corrosion — suited to marine and chemical service. Used in food processing, chemical plant, architecture, heat exchangers, kitchenware and medical devices.
HEAT TREATMENT
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 00Cr25Ni22Mo2N in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
00Cr25Ni22Mo2N is a stainless steel grade from Shanxi Youte Steel, engineered for demanding industrial service where consistent chemistry and reliable mechanical performance are critical.
TYPICAL APPLICATIONS
Sheet, Plate, Bar, Tube, Pipe
AVAILABLE FORMS
Austenitic stainless steel with excellent corrosion resistance, formability and weldability; non-magnetic in annealed condition. High nickel (≈23%) stabilises the austenite and improves toughness and pitting resistance. Molybdenum (≈2.1%) enhances resistance to chloride pitting and crevice corrosion — suited to marine and chemical service. Used in food processing, chemical plant, architecture, heat exchangers, kitchenware and medical devices.
HEAT TREATMENT
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 00Cr25Ni22Mo2N in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
0 Comments
No comments yet. Be the first to share your thoughts!
Leave a Comment