03Х17Н14М3 — stainless Steel: Composition, Properties & Applications
Also known as: 03Х17Н14М3
Russian GOST austenitic stainless.
CHEMICAL COMPOSITION
C:≤0.03;Si:≤0.80;Mn:≤2.00;Cr:16.00-18.00;Ni:12.00-15.00;Mo:3.00-4.00;P:≤0.035;S:≤0.020
TYPICAL APPLICATIONS
International high-end steel for aerospace, oil & gas, defense or engineering.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire, powder
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 03Х17Н14М3 in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
Russian GOST austenitic stainless.
CHEMICAL COMPOSITION
C:≤0.03;Si:≤0.80;Mn:≤2.00;Cr:16.00-18.00;Ni:12.00-15.00;Mo:3.00-4.00;P:≤0.035;S:≤0.020
TYPICAL APPLICATIONS
International high-end steel for aerospace, oil & gas, defense or engineering.
AVAILABLE FORMS
Bar, plate, sheet, tube, forgings, strip, wire, powder
HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).
PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.
SOURCE & SUPPLY
Shanxi Youte Steel stocks 03Х17Н14М3 in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.
0 Comments
No comments yet. Be the first to share your thoughts!
Leave a Comment