06Cr18Ni12Mo2Ti — stainless Steel: Composition, Properties & Applications

Also known as: 06Cr18Ni12Mo2Ti
Ti-stabilized 316. (GB/T 20878; equiv ASTM 316Ti / EN 1.4571 / JIS SUS316Ti). Nominal values—confirm mill certificate.

CHEMICAL COMPOSITION
C:≤0.08;Cr:16.0-18.0;Ni:10.0-14.0;Mo:2.00-3.00;Ti:≥5×C

MECHANICAL PROPERTIES
Tensile:≥515 MPa;Yield:≥205 MPa;Elong:≥40%

TYPICAL APPLICATIONS
钛稳定316。,"Plate

AVAILABLE FORMS
Bar"

STANDARDS & EQUIVALENT GRADES
T 20878 06Cr18Ni12Mo2Ti; ASTM 316Ti; EN 1.4571 / JIS SUS316Ti

HEAT TREATMENT
Solution anneal 1010–1150 °C followed by rapid water quench to retain austenite; not hardenable by heat treatment. Sensitization avoided by low carbon or stabilizers (Ti/Nb).

PROCESSING PRECAUTIONS
Weld with low-carbon or stabilized filler (e.g., 316L, 347) to avoid sensitization; passivate after fabrication. Not hardenable, but work-hardens rapidly — use sharp tools and rigid setups. Avoid chloride contact for 304 in warm service; specify 316/317 for marine or aggressive media.

SOURCE & SUPPLY
Shanxi Youte Steel stocks 06Cr18Ni12Mo2Ti in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.