06XH28MDT — alloy Steel: Composition, Properties & Applications

Also known as: 06XH28MDT
(GOST 5632). Nominal values—confirm mill certificate.

CHEMICAL COMPOSITION
C:0.03-0.10;P:≤0.035;S:≤0.035

MECHANICAL PROPERTIES
Tensile:≥510 MPa;Yield:≥295 MPa;Elong:≥20%

TYPICAL APPLICATIONS
Low-carbon grade used for welded structures, shafts, pins, bolts, nuts, seamless tubes and general engineering components where moderate strength and good weldability are required. Commonly supplied as bar, plate, sheet, tube and forging.

AVAILABLE FORMS
Bar,Plate

STANDARDS & EQUIVALENT GRADES
GOST 5632 06XH28MDT

HEAT TREATMENT
Typically normalized (880–920 °C, air cool) or carburized (900–930 °C) for case-hardening grades, then quenched and tempered at 150–200 °C.

PROCESSING PRECAUTIONS
Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating).

SOURCE & SUPPLY
Shanxi Youte Steel stocks 06XH28MDT in bars, plates, pipes and forgings with mill test certificates, cut-to-length service and export packaging. Contact our team for quotations and technical data sheets.