A242
A242.0-T62 · aluminum
A242.0-T62
Casting | AA A242.0
Si:≤0.40;Fe:≤0.50;Cu:1.20-2.00;Mn:≤0.30;Mg:2.10-2.90;Cr:0.18-0.28;Zn:5.10-6.10;Ti:≤0.20
A242
A242.0-T7 · aluminum
A242.0 cast aluminum
Castings, Sand, Die | AA A242.0 / ASTM B85
Cu:3.5-4.5;Mg:1.2-1.8;Ni:1.8-2.3;Si:0.30-0.80
A242
A242.0-T71 · aluminum
A242.0 cast aluminum
Castings, Sand, Die | AA A242.0 / ASTM B85
Cu:3.5-4.5;Mg:1.2-1.8;Ni:1.8-2.3;Si:0.30-0.80
A243
A243 · alloy
A243
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A244
A244 · alloy
A244
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A245
A245 · alloy
A245
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A246
A246 · alloy
A246
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A247
A247 · alloy
A247
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A248
A248 · alloy
A248
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A249
A249 · alloy
A249
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A25
A25 · alloy
A25
Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear. |
C:≤0.22;Mn:≤1.20;P:≤0.030;S:≤0.030
A250
A250 · alloy
A250
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A251
A251 · alloy
A251
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
A252
A252 · alloy
A252
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.10-0.50;Si:0.10-0.50;Mn:0.30-1.70;P:≤0.040;S:≤0.040
a252
a252001 (EN Structural S235-S355 Hot-Rolled Bar) · highstrength
EN Structural S235-S355 Hot-Rolled Bar
| EN 10025
C:≤0.22;Mn:≤1.60;Si:≤0.55
a252
a252002 (EN Structural S235-S355 Normalized Plate) · highstrength
EN Structural S235-S355 Normalized Plate
| EN 10025
C:≤0.22;Mn:≤1.60;Si:≤0.55
a252
a252003 (EN Structural S235-S355 Annealed Sheet) · highstrength
EN Structural S235-S355 Annealed Sheet
| EN 10025
C:≤0.22;Mn:≤1.60;Si:≤0.55
a252
a252004 (EN Structural S235-S355 Quenched & Tempered Tube) · highstrength
EN Structural S235-S355 Quenched & Tempered Tube
| EN 10025
C:≤0.22;Mn:≤1.60;Si:≤0.55
a252
a252005 (EN Structural S235-S355 Normalized & Tempered Pipe) · highstrength
EN Structural S235-S355 Normalized & Tempered Pipe
| EN 10025
C:≤0.22;Mn:≤1.60;Si:≤0.55