P11
P11 · pipe
P11 Alloy Pipe
Φ25-76×3-10mm | ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
P110
P110 · alloy
P110
Medium-carbon grade for machine parts such as gears, crankshafts, axles, connecting rods, spindles and forgings that need a balance of strength, toughness and machinability. Commonly supplied as bar, plate, sheet, tube and forging. |
C:0.30-0.45;Mn:0.50-1.05;P:≤0.020;S:≤0.020
P12
P12 · alloy
P12
Bar,Plate | ASTM A335 P12, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P122
P122 · alloy
P122
Bar,Plate | ASTM A335 P122, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P2
P2 · alloy
P2
Bar,Plate | ASTM A681 P2, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P20
P20 · alloy
P20
Bar,Plate | ASTM A681 P20
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P20+
P20+Ni · alloy
P20+Ni
Bar, plate, sheet, tube, forgings, strip, wire, powder |
C:0.30-0.40;Si:0.20-0.80;Mn:0.60-1.00;Cr:1.40-2.00;Ni:0.80-1.20;Mo:0.30-0.55;P:≤0.030;S:≤0.030
P21
P21 · alloy
P21
Bar,Plate | ASTM A681 P21, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P22
P22 · alloy
P22
Bar,Plate | ASTM A335 P22, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P22
P22 · pipe
P22 Alloy Pipe
Φ25-76×3-10mm | ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
P23
P23 · alloy
P23
Bar,Plate | ASTM A335 P23, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P235
P235GH · alloy
P235GH
Bar,Plate | EN 10028 P235GH
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P24
P24 · alloy
P24
Bar,Plate | ASTM A335 P24, ASME SA-213/SA-213M (P-designations also per SA-335); ASTM A213
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P250
P250GH · alloy
P250GH
Bar,Plate | EN 1092-1 P250GH
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P265
P265GH · alloy
P265GH
Bar,Plate | BS EN 10028 P265GH
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
P275
P275NH · other
P275NH / 1.0487
Bar, Plate, Tube, Forging |
C:≤0.16;Si:≤0.4;Mn:0.8-1.5;P:≤0.025;S:≤0.01;Cr:≤0.3;Ni:≤0.5;Cu:≤0.3
P280
P280GH · alloy
P280GH
Bar,Plate | EN 1092-1 P280GH
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040