Y071
Y07183 (GB Case-Hardening Series Annealed Tube) · alloy
GB Case-Hardening Series Annealed Tube
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07184 (GB Case-Hardening Series Quenched & Tempered Pipe) · alloy
GB Case-Hardening Series Quenched & Tempered Pipe
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07185 (GB Case-Hardening Series Normalized & Tempered Forging) · alloy
GB Case-Hardening Series Normalized & Tempered Forging
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07186 (GB Case-Hardening Series Cold-Drawn Rod) · alloy
GB Case-Hardening Series Cold-Drawn Rod
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07187 (GB Case-Hardening Series Stress-Relieved Wire) · alloy
GB Case-Hardening Series Stress-Relieved Wire
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07188 (GB Case-Hardening Series Hot-Rolled Block) · alloy
GB Case-Hardening Series Hot-Rolled Block
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07189 (GB Case-Hardening Series Normalized Bar) · alloy
GB Case-Hardening Series Normalized Bar
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07190 (GB Case-Hardening Series Annealed Plate) · alloy
GB Case-Hardening Series Annealed Plate
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07191 (GB Case-Hardening Series Quenched & Tempered Sheet) · casehardening
GB Case-Hardening Series Quenched & Tempered Sheet
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07192 (GB Case-Hardening Series Normalized & Tempered Tube) · alloy
GB Case-Hardening Series Normalized & Tempered Tube
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07193 (GB Case-Hardening Series Cold-Drawn Pipe) · alloy
GB Case-Hardening Series Cold-Drawn Pipe
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07194 (GB Case-Hardening Series Stress-Relieved Forging) · alloy
GB Case-Hardening Series Stress-Relieved Forging
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07195 (GB Case-Hardening Series Hot-Rolled Rod) · alloy
GB Case-Hardening Series Hot-Rolled Rod
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07196 (GB Case-Hardening Series Normalized Wire) · alloy
GB Case-Hardening Series Normalized Wire
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07197 (GB Case-Hardening Series Annealed Block) · alloy
GB Case-Hardening Series Annealed Block
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07198 (GB Case-Hardening Series Quenched & Tempered Bar) · alloy
GB Case-Hardening Series Quenched & Tempered Bar
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y071
Y07199 (GB Case-Hardening Series Normalized & Tempered Plate) · alloy
GB Case-Hardening Series Normalized & Tempered Plate
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y072
Y07200 (GB Case-Hardening Series Cold-Drawn Sheet) · alloy
GB Case-Hardening Series Cold-Drawn Sheet
| GB/T 3077
C:0.17-0.23;Cr:0.70-1.00;Mn:0.50-0.80;Ti:0.04-0.10
Y10C
Y10Cr17 · stainless
Y10Cr17
Martensitic stainless steel combining moderate corrosion resistance with high strength and hardness after heat treatment. Used for cutlery, surgical instruments, turbine blades, valves, pumps, fasteners and bearings in mildly corrosive environments. | T 20878 Y10Cr17
C:≤0.12;Cr:16.0-18.0;S:≥0.15