09X16H4B
Alloy Steel09X16H4B
(GOST 5632). Nominal values—confirm mill certificate.
Chemical Composition (%)
| C | 0.06 |
|---|---|
| P | 0.035 |
| S | 0.035 |
Mechanical Properties
Tensile:≥510 MPa;Yield:≥295 MPa;Elong:≥20%
Chinese Standard
GOST 5632 09X16H4B
Available Forms
Bar,Plate
Uses
Low-carbon grade used for welded structures, shafts, pins, bolts, nuts, seamless tubes and general engineering components where moderate strength and good weldability are required. Commonly supplied as bar, plate, sheet, tube and forging.
Heat Treatment
Typically normalized (880–920 °C, air cool) or carburized (900–930 °C) for case-hardening grades, then quenched and tempered at 150–200 °C.
Precautions
Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating).
Comments 0