1.0503
Alloy Steel1.0503
1.0503 supplied by Shanxi Youte Steel (jlhsteel.net).
Chemical Composition (%)
| C | 0.42 |
|---|---|
| MN | 0.9 |
| SI | 0.4 |
Chinese Standard
DIN EN 10083
Equivalent Grades
C45
Available Forms
Bar, Plate, Tube, Forging, Wire
Uses
Medium-carbon grade for machine parts such as gears, crankshafts, axles, connecting rods, spindles and forgings that need a balance of strength, toughness and machinability. Commonly supplied as bar, plate, sheet, tube and forging.
Heat Treatment
Austenitize at 820–870 °C (oil or water quench depending on section) and temper at 400–650 °C to the required strength/toughness balance.
Precautions
Preheat and control interpass temperature when welding; post-weld heat treatment or stress relief is recommended to avoid hard-zone cracking. Use low-hydrogen electrodes. Protect from decarburization during heating (controlled atmosphere or protective coating).
Comments 0