1.4013
Stainless Steel1.4013
Mo-bearing ferritic, superior corrosion resistance to 430. (EN 10088; equiv ASTM 434 / EN 1.4113 / JIS SUS434). Nominal values—confirm mill certificate.
Chemical Composition (%)
| C | 0.12 |
|---|---|
| CR | 16 |
| MO | 0.75 |
Mechanical Properties
Tensile:≥490 MPa;Yield:≥205 MPa
Chinese Standard
EN 10088 1.4013
Equivalent Standards
ASTM 434
Equivalent Grades
EN 1.4113 / JIS SUS434
Applications
含钼铁素体，耐蚀优于430。,"Sheet
Available Forms
Bar"
Uses
Martensitic stainless steel combining moderate corrosion resistance with high strength and hardness after heat treatment. Used for cutlery, surgical instruments, turbine blades, valves, pumps, fasteners and bearings in mildly corrosive environments.
Heat Treatment
Annealing/quench from 980–1050 °C (oil or air) then temper 150–650 °C; lower temper gives higher hardness, higher temper improves toughness.
Precautions
Preheat and post-weld heat treat to avoid hydrogen cracking; soft anneal before heavy machining. Lower corrosion resistance than austenitic grades — not for strong chlorides.
Comments 0