1.4060
Stainless Steel1.4060
General-purpose martensitic stainless steel. (EN 10088; equiv ASTM 410 / EN 1.4006 / JIS SUS410 / GB 12Cr13). Nominal values—confirm mill certificate.
Chemical Composition (%)
| C | 0.15 |
|---|---|
| CR | 11.5 |
Mechanical Properties
Tensile:≥480 MPa;Yield:≥275 MPa;Elong:≥20%
Chinese Standard
EN 10088 1.4060
Equivalent Standards
ASTM 410
Equivalent Grades
EN 1.4006 / JIS SUS410 / GB 12Cr13
Applications
通用马氏体不锈钢。,"Bar
Available Forms
Plate"
Uses
Martensitic stainless steel combining moderate corrosion resistance with high strength and hardness after heat treatment. Used for cutlery, surgical instruments, turbine blades, valves, pumps, fasteners and bearings in mildly corrosive environments.
Heat Treatment
Annealing/quench from 980–1050 °C (oil or air) then temper 150–650 °C; lower temper gives higher hardness, higher temper improves toughness.
Precautions
Preheat and post-weld heat treat to avoid hydrogen cracking; soft anneal before heavy machining. Lower corrosion resistance than austenitic grades — not for strong chlorides.
Comments 0