1.4510
Stainless Steel1.4510
Ti-stabilized ferritic, good weldability. (EN 10088; equiv ASTM 439 / EN 1.4510 / JIS SUS439). Nominal values—confirm mill certificate.
Chemical Composition (%)
| C | 0.07 |
|---|---|
| CR | 17 |
| TI | 0.2 |
Mechanical Properties
Tensile:≥450 MPa;Yield:≥205 MPa
Chinese Standard
EN 10088 1.4510
Equivalent Standards
ASTM 439
Equivalent Grades
EN 1.4510 / JIS SUS439
Applications
钛稳定铁素体，焊接好。,"Sheet
Available Forms
Tube"
Uses
Ferritic stainless steel with good resistance to stress-corrosion cracking and oxidation, plus formability and lower cost. Used for automotive trim, exhaust systems, domestic appliances, decorative and welded structures.
Heat Treatment
Annealed at 780–850 °C and air cooled; stabilize at 600–800 °C to avoid 475 °C embrittlement; not hardenable by heat treatment.
Precautions
Avoid welding in the 475 °C embrittlement and sigma-phase ranges; use matched filler and minimize heat input. Good resistance to stress-corrosion cracking.
Comments 0