15X1M1

Alloy Steel

15X1M1

Cr-Mo heat-resistant steel. (GOST 4543; equiv ASTM A387 Gr.12 / DIN 15CrMo5). Nominal values—confirm mill certificate.

Chemical Composition (%)

C0.12
CR0.8
MO0.4

Mechanical Properties

Tensile:≥440 MPa;Yield:≥295 MPa

Chinese Standard

GOST 4543 15X1M1

Equivalent Standards

ASTM A387 Gr.12

Equivalent Grades

Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating). Machine the core stock before surface hardening; leave grinding allowance for the hardened case.

Applications

铬钼耐热钢。,"Tube

Available Forms

Plate

Uses

Bar"

Heat Treatment

Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear.

Precautions

Typically normalized (880–920 °C, air cool) or carburized (900–930 °C) for case-hardening grades, then quenched and tempered at 150–200 °C. Carburize 900–930 °C, direct/intake quench, temper 150–200 °C; useful case depth 0.5–1.5 mm.

Request a Quote Back to category

Comments 0