20NiCrMo2

Alloy Steel

20NiCrMo2

Heavy-duty carburizing gear steel. (EN 10084; equiv EN 10084 / 1.6587 / DIN 18CrNiMo7-6). Nominal values—confirm mill certificate.

Chemical Composition (%)

C0.15
CR1.5
NI1.4
MO0.25

Mechanical Properties

Tensile:1180-1420 MPa;Yield:≥850 MPa

Chinese Standard

EN 10084 20NiCrMo2

Equivalent Standards

EN 10084

Applications

重载渗碳齿轮钢。,Bar

Available Forms

Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear.

Uses

Typically normalized (880–920 °C, air cool) or carburized (900–930 °C) for case-hardening grades, then quenched and tempered at 150–200 °C. Carburize 900–930 °C, direct/intake quench, temper 150–200 °C; useful case depth 0.5–1.5 mm.

Heat Treatment

Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating). Machine the core stock before surface hardening; leave grinding allowance for the hardened case.

Precautions

1.6587 / DIN 18CrNiMo7-6

Request a Quote Back to category

Comments 0