25Cr2MoV

Alloy Steel

25Cr2MoV

(GB/T 3077). Nominal values—confirm mill certificate.

Chemical Composition (%)

C0.22
CR1.7
MO0.7
V0.7
P0.035
S0.035

Mechanical Properties

Tensile:≥620 MPa;Yield:≥355 MPa;Elong:≥18%;RA:≥45%

Chinese Standard

T 3077 25Cr2MoV

Available Forms

Bar,Plate

Uses

Low-alloy engineering steel with enhanced hardenability and strength from alloying elements. Chromium (≈2%) improves hardenability, wear and corrosion resistance. Molybdenum (≈0.9%) raises high-temperature strength and prevents temper embrittlement. Vanadium (≈0.9%) refines grain and strengthens the tempered structure. Applied to gears, shafts, bolts, connecting rods, pressure parts and heavy forgings in automotive, energy and machinery sectors.

Heat Treatment

Austenitize at 820–870 °C (oil or water quench depending on section) and temper at 400–650 °C to the required strength/toughness balance.

Precautions

Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating).

Request a Quote Back to category

Comments 0