25MnTiBRE

Alloy Steel

25MnTiBRE

(GB/T 3077). Nominal values—confirm mill certificate.

Chemical Composition (%)

C0.22
MN0.7
TI0.7
P0.035
S0.035

Mechanical Properties

Tensile:≥620 MPa;Yield:≥355 MPa;Elong:≥18%;RA:≥45%

Chinese Standard

T 3077 25MnTiBRE

Available Forms

Bar,Plate

Uses

Medium-carbon grade for machine parts such as gears, crankshafts, axles, connecting rods, spindles and forgings that need a balance of strength, toughness and machinability. Commonly supplied as bar, plate, sheet, tube and forging.

Heat Treatment

Austenitize at 820–870 °C (oil or water quench depending on section) and temper at 400–650 °C to the required strength/toughness balance.

Precautions

Weldable with standard procedures; preheat may be needed for thick sections or higher-carbon/ alloy grades. Protect from decarburization during heating (controlled atmosphere or protective coating).

Request a Quote Back to category

Comments 0