50CrMo

Alloy Steel

50CrMo

Chinese GB steel grade 50CrMo

Chemical Composition (%)

C0.48
SI0.17
MN0.4
CR0.8
MO0.15
P0.035
S0.035

Applications

Chinese national standard (GB) steel grade per GB/T specification.

Available Forms

Bar, plate, sheet, tube, forgings, strip, wire

Uses

Spring steel with high elastic limit and fatigue strength for coils, leaf springs, clips and suspension parts. Silicon (≈0.27%) raises elastic limit and tempering resistance. Supplied as strip, wire and bar; shot-peened after forming for longer service life.

Heat Treatment

Austenitize 830–880 °C (oil quench) and temper at 400–520 °C; stress-relieve formed springs at 230–320 °C after coiling.

Precautions

Preheat and control interpass temperature when welding; post-weld heat treatment or stress relief is recommended to avoid hard-zone cracking. Use low-hydrogen electrodes. Protect from decarburization during heating (controlled atmosphere or protective coating). Shot-peen after coiling to improve fatigue life; avoid sharp bends and surface defects.

Request a Quote Back to category

Comments 0