CoCr F75
OtherCoCr F75
CoCr F75 supplied by Shanxi Youte Steel (jlhsteel.net).
Chemical Composition (%)
| CR | 27 |
|---|---|
| MO | 5 |
| NI | 2.5 |
| FE | 1 |
| C | 0.35 |
Chinese Standard
ASTM F75
Applications
Specialty and corrosion-resistant applications.
Available Forms
Bar, Plate, Sheet, Tube, Wire, Casting, Forging
Uses
Martensitic stainless steel combining moderate corrosion resistance with high strength and hardness after heat treatment. Used for cutlery, surgical instruments, turbine blades, valves, pumps, fasteners and bearings in mildly corrosive environments.
Heat Treatment
Annealing/quench from 980–1050 °C (oil or air) then temper 150–650 °C; lower temper gives higher hardness, higher temper improves toughness.
Precautions
Preheat and post-weld heat treat to avoid hydrogen cracking; soft anneal before heavy machining. Lower corrosion resistance than austenitic grades — not for strong chlorides.
Comments 0