Discalloy

Stainless Steel

Discalloy

Specialty steel grade. ; equiv Discalloy). Nominal values—confirm mill certificate.

Chemical Composition (%)

C0.2
CR11
NI0.5
MO0.9
W0.9

Mechanical Properties

Tensile:≥900 MPa;Yield:≥700 MPa

Chinese Standard

AMS 5607 Discalloy

Equivalent Standards

Discalloy

Applications

高温马氏体，汽轮机叶片。,Forging

Available Forms

Martensitic stainless steel combining moderate corrosion resistance with high strength and hardness after heat treatment. Used for cutlery, surgical instruments, turbine blades, valves, pumps, fasteners and bearings in mildly corrosive environments.

Uses

Annealing/quench from 980–1050 °C (oil or air) then temper 150–650 °C; lower temper gives higher hardness, higher temper improves toughness.

Heat Treatment

Preheat and post-weld heat treat to avoid hydrogen cracking; soft anneal before heavy machining. Lower corrosion resistance than austenitic grades — not for strong chlorides.

Request a Quote Back to category

Comments 0