SSAB Toolox 33
OtherSSAB Toolox 33
Proprietary/trade-name steel grade SSAB Toolox 33
Chemical Composition (%)
| C | 0.25 |
|---|---|
| SI | 0.2 |
| MN | 0.6 |
| CR | 1.2 |
| MO | 0.5 |
| NI | 0.5 |
| V | 0.05 |
Applications
Manufacturer proprietary steel grade (trade name) per maker specification.
Available Forms
Bar, plate, sheet, tube, forgings, strip, wire, powder
Uses
Low-alloy engineering steel with enhanced hardenability and strength from alloying elements. Chromium (≈1.6%) improves hardenability, wear and corrosion resistance. Molybdenum (≈0.75%) raises high-temperature strength and prevents temper embrittlement. Nickel (≈1%) increases toughness and impact strength at low temperature. Vanadium (≈0.125%) refines grain and strengthens the tempered structure. Applied to gears, shafts, bolts, connecting rods, pressure parts and heavy forgings in automotive, energy and machinery sectors.
Heat Treatment
Austenitize at 820–870 °C (oil or water quench depending on section) and temper at 400–650 °C to the required strength/toughness balance.
Precautions
Preheat and control interpass temperature when welding; post-weld heat treatment or stress relief is recommended to avoid hard-zone cracking. Use low-hydrogen electrodes. Protect from decarburization during heating (controlled atmosphere or protective coating).
Comments 0