T6
T6 · other
T6
Nickel/cobalt-base superalloy retaining high strength, creep and corrosion resistance at extreme temperature. Cobalt (≈12%) raises hot corrosion and wear resistance. Used in gas-turbine blades, aero-engine hot sections, combustors and advanced energy syst | ASTM A600 T6
C:0.72-0.82;W:18.0-21.0;Cr:3.75-4.50;V:2.40-2.80;Co:11.0-13.0;P:≤0.030;S:≤0.030
T60
T60 · alloy
T60
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T7
T7 · alloy
T7
Bar,Plate | ASTM A213 T7
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T75
T75 · alloy
T75
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T8
T8 · other
T8
Nickel/cobalt-base superalloy retaining high strength, creep and corrosion resistance at extreme temperature. Cobalt (≈5%) raises hot corrosion and wear resistance. Used in gas-turbine blades, aero-engine hot sections, combustors and advanced energy syste | ASTM A600 T8
C:0.75-0.85;W:13.0-15.0;Mo:0.60-1.00;Cr:3.75-4.50;V:1.80-2.30;Co:4.00-6.00;P:≤0.030;S:≤0.030
T8Mn
T8Mn · other
T8Mn
Wire | T 1298 T8Mn
C:0.95-1.05;Si:0.15-0.35;Mn:0.25-0.45;Cr:1.40-1.65
T9
T9 · alloy
T9
Bar,Plate | ASTM A213 T9
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T90
T90 · alloy
T90
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T91
T91 · alloy
T91
Bar,Plate | ASTM A213 T91
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T911
T911 · alloy
T911
Bar,Plate | ASTM A213 T911
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T92
T92 · alloy
T92
Bar,Plate | ASTM A213 T92
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
T95
T95 · alloy
T95
Medium-carbon grade for machine parts such as gears, crankshafts, axles, connecting rods, spindles and forgings that need a balance of strength, toughness and machinability. Commonly supplied as bar, plate, sheet, tube and forging. |
C:0.30-0.45;Mn:0.50-1.05;P:≤0.020;S:≤0.020
T95-
T95-1 · alloy
T95-1
Medium-carbon grade for machine parts such as gears, crankshafts, axles, connecting rods, spindles and forgings that need a balance of strength, toughness and machinability. Commonly supplied as bar, plate, sheet, tube and forging. |
C:0.30-0.45;Mn:0.50-1.05;P:≤0.020;S:≤0.020
TA1
TA1 · titanium
TA1
Bar | T 3621 TA1
Ti:≥99.5;Fe:≤0.20;O:≤0.18;C:≤0.08;N:≤0.03;H:≤0.015
TA1
TA1 Annealed · titanium
TA1 Annealed
Bar,Sheet,Forging | ASTM TA1 Annealed
Al:5.50-6.75;V:3.50-4.50;Fe:≤0.40;O:≤0.20;C:≤0.10;N:≤0.05;H:≤0.015
TA1
TA1 M · titanium
TA1 M
Bar,Sheet,Forging | ASTM TA1 M
Al:5.50-6.75;V:3.50-4.50;Fe:≤0.40;O:≤0.20;C:≤0.10;N:≤0.05;H:≤0.015
TA1
TA1 STA · titanium
TA1 STA
Bar,Sheet,Forging | ASTM TA1 STA
Al:5.50-6.75;V:3.50-4.50;Fe:≤0.40;O:≤0.20;C:≤0.10;N:≤0.05;H:≤0.015
TA10
TA10 · titanium
TA10
Bar | T 3621 TA10
Fe:≤0.20;O:≤0.18;Ti:balance