W6Mo
W6Mo5Cr4V2Co5 · other
W6Mo5Cr4V2Co5
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈18.25%/0%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to | T 9943 W6Mo5Cr4V2Co5
C:0.70-0.80;W:17.5-19.0;Cr:3.80-4.40;V:1.00-1.40
W6Mo
W6Mo5Cr4V3 · other
W6Mo5Cr4V3
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈6.125%/5%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to | T 1299 W6Mo5Cr4V3
C:0.80-0.90;W:5.50-6.75;Mo:4.50-5.50;Cr:3.80-4.40;V:1.75-2.20
W6Mo
W6Mo5Cr4V5SiNbAl · other
W6Mo5Cr4V5SiNbAl
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈6.125%/5%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to | T 1299 W6Mo5Cr4V5SiNbAl
C:0.80-0.90;W:5.50-6.75;Mo:4.50-5.50;Cr:3.80-4.40;V:1.75-2.20
W6Mo
W6Mo5Cr4VCo8 · other
W6Mo5Cr4VCo8
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈18.25%/0%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to | T 9943 W6Mo5Cr4VCo8
C:0.70-0.80;W:17.5-19.0;Cr:3.80-4.40;V:1.00-1.40
W70M
W70Mo6Cr4V2 · alloy
W70Mo6Cr4V2
Bar,Plate | T 588 W70Mo6Cr4V2
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
W75M
W75Mo6Cr4V2 · alloy
W75Mo6Cr4V2
Bar,Plate | T 588 W75Mo6Cr4V2
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
W7Mo
W7Mo4Cr4V2Co5 · other
W7Mo4Cr4V2Co5
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈6.125%/5%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to | T 1299 W7Mo4Cr4V2Co5
C:0.80-0.90;W:5.50-6.75;Mo:4.50-5.50;Cr:3.80-4.40;V:1.75-2.20
W9Mo
W9Mo3Cr4V · other
W9Mo3Cr4V
Tool and die steel for cutting, forming, punching and molding tools. Tungsten/molybdenum (≈9%/3%) give hot hardness and red-hardness for high-speed and hot-work tools. High chromium (≈4.1%) provides wear resistance and secondary hardening. Applied to blan | T 1299 W9Mo3Cr4V
C:0.77-0.87;W:8.50-9.50;Mo:2.70-3.30;Cr:3.80-4.40;V:1.30-1.70;P:≤0.030;S:≤0.030
Wasp
Waspaloy · hightemp
Waspaloy
Forging" |
Ni:≥53.0;Cr:18.0-21.0;Co:12.0-15.0;Mo:3.5-5.0;Ti:2.75-3.25;Al:1.20-1.60
WB36
WB36 · other
WB36
Bar, plate, sheet, tube, forgings, strip, wire |
C:0.20-0.50;Si:0.17-0.37;Mn:0.40-0.80;P:≤0.035;S:≤0.035
WC-C
WC-Co · alloy
WC-Co
Block,Insert | ISO 513 WC-Co
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WC1
WC1 · alloy
WC1
Bar,Plate | ASTM A217 WC1
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WC4
WC4 · alloy
WC4
Bar,Plate | ASTM A217 WC4
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WC5
WC5 · alloy
WC5
Bar,Plate | ASTM A217 WC5
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WC6
WC6 · alloy
WC6
Bar,Plate | ASTM A217 WC6
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WC9
WC9 · alloy
WC9
Bar,Plate | ASTM A217 WC9
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WCA
WCA · alloy
WCA
Bar,Plate | ASTM A216 WCA
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WCB
WCB · alloy
WCB
Bar,Plate | ASTM A216 WCB
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
WCC
WCC · alloy
WCC
Bar,Plate | ASTM A216 WCC
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040