X40C
X40Cr13 · stainless
X40Cr13
Plate" | DIN 17350 X40Cr13
C:≥0.15;Cr:12.0-14.0
X40C
X40CrMoV5-1 · stainless
X40CrMoV5-1
Forging" | EN 10269 X40CrMoV5-1
C:0.18-0.24;Si:0.10-0.50;Cr:11.0-12.5;Mo:0.80-1.20;Ni:0.30-0.80;V:0.20-0.35
X42
X42 · alloy
X42
Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear. |
C:≤0.22;Mn:≤1.20;P:≤0.030;S:≤0.030
X42C
X42Cr13 · stainless
X42Cr13
Plate" | DIN 17350 X42Cr13
C:≥0.15;Cr:12.0-14.0
X42M
X42M · alloy
X42M
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
X46
X46 · alloy
X46
Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear. |
C:≤0.22;Mn:≤1.20;P:≤0.030;S:≤0.030
X46C
X46Cr13 · alloy
X46Cr13
Bar,Plate | ISO 683-13 X46Cr13
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
X46M
X46M · alloy
X46M
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
X4Cr
X4CrNiMo16-5-1 · stainless
X4CrNiMo16-5-1
Bar, plate, sheet, tube, forgings, strip, wire, powder |
C:≤0.08;Si:≤1.00;Mn:≤1.50;Cr:14.00-16.00;Ni:4.00-6.00;Mo:0.50-1.00;P:≤0.045;S:≤0.030
X50C
X50CrMoV13-1 · stainless
X50CrMoV13-1
Plate" | DIN 17350 X50CrMoV13-1
C:≥0.15;Cr:12.0-14.0
X50C
X50CrMoV15 · stainless
X50CrMoV15
Sheet,Bar | EN 10088
C:≤0.08;Si:≤1.00;Mn:≤2.00;Cr:16.0-18.0;Ni:10.0-14.0;Mo:2.0-3.0;P:≤0.045;S:≤0.030
X52
X52 · alloy
X52
Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear. |
C:≤0.22;Mn:≤1.20;P:≤0.030;S:≤0.030
X52M
X52M · alloy
X52M
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
X52Q
X52Q · alloy
X52Q
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040
X55C
X55CrMo14 · stainless
X55CrMo14
Plate" | DIN 17350 X55CrMo14
C:≥0.15;Cr:12.0-14.0
X56
X56 · alloy
X56
Carburizing (case-hardening) steel with low carbon core for toughness and a hard, wear-resistant surface after carburizing. Used for gears, camshafts, pinions, spline shafts, bushings and transmission parts subjected to fatigue and surface wear. |
C:≤0.22;Mn:≤1.20;P:≤0.030;S:≤0.030
X56M
X56M · alloy
X56M
Bar,Plate |
C:0.30-0.45;Mn:0.60-1.00;Si:0.15-0.35;Cr:0.50-1.00;P:≤0.035;S:≤0.040